CerMark Ultrablack Spray for laser marking 57 g./2oz.

Developed by the German Laboratory Ferro from the LMM-6000 formula for marking in metals, glass and ceramics.

Valve system that prevents spray cage.

Quantity Package: 2 ounces / 57 grams.

Mode of employment:

• Shake the container before using. Let the agitator's ball vibrate for at least 2 minutes. Not stirring well can result in the failure of the aerosol system. 
• Clean the metal surface so that it is free of any type of lubricants or oils. Hold the can approximately 20-30 cm. of the material to be spray. Press the valve completely during the spray. Apply a thin layer of Cermark Ultra to the metal, apply a uniform layer. Try to cover the area to mark with a slight spray, using two passes. After use, the
• The can of the can should be cleaned to eliminate waste and prevent the nozzle from getting stuck. We recommend that all Cermark Ultra applied in a well ventilated area or spray cabin designed to remove the user's air.
• Drying: It is important that Cermark Ultra dries completely. It will be dried in the air in about 2 minutes.