Nozzle for Orca torch

Name: Nozzle for Orca torch
Brand: Orca
SKU: 546
Price: 20.5 EUR
Availability: InStock

Reference 00799

In Stock

€20.50

Tax excluded

Nozzle to adapt to the Orca range of torches.

Available 3 sizes: small, medium and large.

Measure

Free shipping from 170 €.

At home from 24 h.

Description
Reviews (0)

Replacement nozzles for the Orca brand butane gas torch.

Diameter:

Small: 2 mm.
Medium: 2.6 mm.
Large: 3.8mm.

Maximum temperature: 1300º C.

No reviews

8 other products in the same category:

$White hard refractory brick 230 x 115 x 30 cm.$

In Stock

Welding and refractory

White hard refractory brick 230 x 115 x 30 cm.

00845

€10.40

Orca torch with 3 nozzles (without hose)

Orca torch with 3 nozzles (without hose) 2

In Stock

In Stock

In Stock

$Ladrillo refractario 11x22 cm. con soporte giratorio$

In Stock

Support for 65 mm. round crucibles right hand

Support for 65 mm. round crucibles right hand 2

In Stock

In Stock

In Stock

Customers who bought this product also bought:

In Stock

Files and chisels

Vallorbe flat needle file 180 mm

€11.76

Needle file for the jeweler's workshop with a flat section manufactured by the Swiss brand Vallorbe. Length: 180mm. Round handle.

In Stock

Brushes and abrasives for micromotor

22 mm brass wire mounted brush.

00597

€1.90

Corrugated brass wire brush, with great abrasive power, which will make it easier for us to grind or remove oxides from metal. 2.35mm stem. Diameter: 22mm.

Lima vallorbe "habilis" triangular 215 mm/9.4mm

In Stock

Files and chisels

Vallorbe file "habilis" round 215mm / 6.5mm

€19.32

Thermal insulation paste Technoflux AP 120 ml.

In Stock

Welding and refractory

Thermal insulation paste Technoflux AP 120 ml.

00860

€5.44

Technoflux AP Hot/Cold Thermal Insulation Paste is an essential product for any jewelry workshop that works with precision soldering. Its thermal insulation formula is designed to protect areas that should not be heated, such as set stones, sensitive elements, or already soldered parts of the design. Once used, it washes off with water.

In Stock

Lampe for jewelry

90 LEDs magnifying lamp with clamp

05258

€84.32

Adequate lighting is essential in precision work in the workshop. Provided with white light LEDS that offer powerful lighting. Very low consumption. 60 high brightness white LEDs with 5 diopter lens. - Table clamp.

Vallorbe Midget mid-cut file 180 mm/chopped 2

Vallorbe Midget mid-cut file 180 mm/chopped 2 2

In Stock

Files and chisels

Vallorbe Midget mid-cut file 180 mm/chopped 2

€12.48

Needle file for finishing metallic materials such as gold and silver, achieving brilliant results in your work. Made of high quality steel by the Swiss brand Vallorbe. Available: Chopped 00 to 3.

Out-of-Stock

Welding and refractory

Borax cones 120 grs

00308

€4.50

Borax for soldering rod. Rub with water until you get a paste. Price per unit (bar).

View

In Stock

Burs and drills

Maillefer double cone bur 70º FIG. HB 6 units

€10.14

The double-cone burr is designed for precision work with a micromotor. Uniform spacing between the teeth ensures a precise cut in difficult-to-reach areas during jewellery workshop work. Box of 6, non-separable.

View

Edenta Abrasive Brown Cylindrical Polisher 21x6 mm. for...

In Stock

Brushes and abrasives for micromotor

Edenta Abrasive Brown Cylindrical Polisher 21x6 mm. for pre-polishing

08001

€0.52

Silicone cylinder, brown, to be mounted on a micromotor using a threaded stem. Suitable for pre-polishing pieces of gold, silver and other precious alloys.

CAZOLETA REFRACTARIA 55 CM. DIAMETRO CON PICO

CAZOLETA REFRACTARIA 55 CM. DIAMETRO CON PICO 2

In Stock

Casting and melting

Crucible refractory bowl with spout

€2.70

The refractory crucible with a spout is an essential tool in any jewelry workshop for melting and casting precious metals, allowing for the application of a direct flame for casting. Made of high-temperature resistant refractory ceramic. Its spout design facilitates clean and controlled pouring of the molten metal.