In Stock Watchmaking tools Pliers pierce watch straps 01263 €8.75 Pliers for drilling 2 mm holes in leather straps. Made of steel with a plastic sheath on the handle to improve grip. Length: 140mm. Add to cart
In Stock Clockmaking Binocular magnifiers LED light with 5 lens mount 30005 €21.90 Includes a case with 5 magnifying glasses of different interchangeable magnifications (1.0 1.5 2.0 2.5 3.5 x). Led light. Add to cart
In Stock Clockmaking Punch and hammer set R02879 €13.95 Kit to remove pins. Includes: - 1 hammer. - 1 wooden slot holder. - 2 punches (0.80-1.00 mm.). - 2 spare bolts 0.80 mm. - 2 replacement bolts of 1.00 mm. Add to cart
In Stock Clockmaking Aluminum case 12 containers 06194-1 €6.30 Aluminum sorting box. Aluminum containers 35 x 20 mm. Dimensions: 165 x 35 x 20 mm. Add to cart
In Stock Clockmaking Blue plasctic box 24 compartments 02896 €7.91 Plastic sorting box. Transparent sliding lid. Dimensions: 195 x 125 x 20mm. Add to cart
In Stock Clockmaking Set of 24 square and round nylon cups 02879 €72.00 Assortment of 24 square and round cups to place glasses with a tension ring. Made of nylon. Includes: - 6 square bits: 20 to 45 mm. - 17 round studs: 15 to 48 mm. - 1 Tas base. Add to cart
In Stock Clockmaking Waterproof tester 02799 €360.00 Pour vérifier l'étanchéité des boîtiers de montres avec de l'air comprimé. L'avantage de cet appareil est que le contrôle peut être effectué avec une montre en utilisation normale. Très robuste et stable, il permet un contrôle sans risques pour la montre. Pression maximale : 3 bars. Temps de contrôle : 10-60 secondes. Capacité : 2 montres. Add to cart
In Stock Hand tools Plastic acid clamp 01054 €1.10 Clamp made of plastic: suitable for handling cells and batteries, avoiding corrosion in other metal clamps. Length: 125mm. Add to cart
In Stock Clockmaking Set of 10 Bergeon precision screwdrivers 09070 €386.00 Wick measures mm. 0.50 - 0.60 - 0.80 - 1.00 - 1.20 - 1.40 - 1.60 - 2.00 - 2.50 - 3.00 With ergonomic handle and 10 spare wicks on a rotating base. Swiss made. Add to cart
In Stock Watchmaking machines and products Press to close pressurized bottoms with 15 aluminum tases 02838 €43.20 Add to cart
In Stock Clockmaking Bergeon bellows knob 02847-1 €17.80 Length: 95mm. Bellows with PVC tip and valve at the bottom of the spring that prevents aspiration at the tip. Made in Switzerland. Add to cart
In Stock Clockmaking Bergeon antirust oil 50 g. 02776 €39.00 Submerge the piece to be treated for about 2 minutes, rinse with running water and dry. Do not dry the piece without cleaning it previously with water. To treat very small pieces, spread a toothpick with the liquid and rub the rust stain with it. Made in Switzerland. Add to cart
In Stock Clockmaking Useful for removing 2-pronged army pins 02900 €3.57 Steel tool to remove watch pins. Includes: a round tip, another in V of 1.60 mm. and flat in V of 3.85 mm. Add to cart
In Stock Clockmaking Rodico cleaning product Bergeon 6033-1 02779 €7.76 To clean the balance wheel pivots, watch wheels. To remove digital marks etc. on the plates, bridges, spheres, needles, jewels; to remove excess oil from the stones, and remove broken pivots from the stones. BERGEON is a prestigious watch brand manufactured in Switzerland. Add to cart
In Stock Clockmaking Útil para quitar agujas reloj 174 02806 €8.60 Allows safe removal of the set of hands on wristwatches, without damaging the dial or set of hands. Add to cart
On sale! -16% In Stock Clockmaking Machine to wind and control 6 watches 02792 €122.40 €145.71 Ferris wheel machine for running and controlling the mechanical parts of quartz watches, especially the calendar mechanism. With an approximation of 5 seconds on average, it indicates the effective gait on the wrist. 4 turns per minute. Add to cart
In Stock Watchmaking tools Pliers to shrink armys with bolt 02859 €21.00 Pliers to remove and place the pins of all types of metal bracelets. Its plastic support prevents damage to the bracelets. Add to cart
In Stock Clockmaking Tool to drive bracelet pins in and out Bergeon 6578 02804 €52.29 The tool is used: - one side to remove the spring pins Fig. 1 and 2. - one side to remove and insert the pins Fig. 3 and 4. Metallic structure with synthetic material body. Made in Switzerland. Add to cart