Casting and melting consumables

All kinds of materials for microfusion or lost wax: coatings, preformed Ferris waxes or Fusimold silicones.

Showing 1-24 of 108 item(s)

In Stock

Casting and melting consumables

Ferris Flat Sided Wax green tube

00437-1

€9.20

Green modeling wax in the shape of a seal, indicated for rings, cufflinks, pendants, medallions and others. Melting point: 108º C Hardness: 55.

In Stock

Casting and melting consumables

Ferris Flat Sided Wax blue tube

00437

€9.20

Tube of very flexible blue wax (Shore D 52) with a flat side, ideal for "signet" type rings. Length: 150mm. Diameter: 32mm. Inner hole centered 15.9 mm. diameter. Great results in lost wax casting, to work with different techniques: hot spatula, wax welder, burins and milling, etc...

In Stock

Casting and melting consumables

Blue Eccentric wax tube Ferris

00457

€8.74

Special microfusion wax tube for jewelry modeling, dentistry and more. Blue wax is very flexible, perfect for rounded models with fewer details, ideal for lost wax casting, thanks to the little residue it leaves.

In Stock

Casting and melting consumables

Green Eccentric wax tube Ferris 27x150 mm.

00457-1

€9.20

In Stock

Casting and melting consumables

Ferris rings tube green 27x150 mm

00416-1

€9.20

In Stock

Casting and melting

Ferris ring tube blue 27x150 mm

00416

€9.69

Indicated in the most delicate lost wax castings. Concentric central hole: rings, medallions, etc. Suitable for sawing, carving, drilling or laminating with ease.

In Stock

Casting and melting consumables

Prestige OPTIMA investmen powder

00431

€74.45

Suitable for wax casting, machined waxes, 3D printing resins by SLA and DLP systems, Wax-based polymers and hybrid wax or plastic models. Burning cycles: up to 860ºC. Due to its high weight, this item carries an additional shipping cost of €9,95 (VAT not included)

In Stock

Casting and melting

Graphite crucible 3 kg. for Graficarbo oven

05627

€44.55

Height = 158 mm. Upper diameter = 77 mm. bottom diameter = 62 mm. Capacity: 3000g AU.

In Stock

Casting and melting consumables

1 pound blue FERRIS wax block

00484-2

€17.90

Special wax for highly complex jobs in jewelry, dentistry, lost wax, etc... Blue wax is flexible, suitable for very fine ricones, although it can be carved, sawed or drilled. 1 pound=450 gr. approximately.

In Stock

Casting and melting consumables

Casting silicone Fusimold Blue

00443

€13.00

In Stock

Casting and melting consumables

Casting silicone Fusimold orange

00422

€16.27

1 KG.

In Stock

Casting and melting consumables

CASTING SILICONE FUSIMOL YELLOW

00419

€13.65

1 KG.

In Stock

Casting and melting consumables

Technoflux Silicone spray for rubbers

00426

€6.85

Silicone-based spray to release wax without leaving residue or breakage. Apply in rubber molds.

In Stock

Casting and melting consumables

TECHNOFLUX -F.P. 1 kg SPECIAL FOR PRECIUOS MET

00201

€33.92

For the casting of gold and silver. Mixture of different types of salts.Reduces oxidation and helps clean the alloy, improving its fluidity and quality.

In Stock

Casting and melting consumables

Wax in sheets of 6 to 3 mm. Green Ferris

00415-2

€22.24

1/2 pound Ferris block of green wax (hardness:55) in assorted thicknesses. Ideal for making original molds for jewelry, dental, model making, etc... it is characterized by being ideal for lost wax casting. Very easy to cut and shape.

Surtido hilos redondos cera azul Vigor 0,90 a 4,10 mm.

In Stock

Casting and melting consumables

Assortment of round blue wax wires Vigor 0.90 to 4.10 mm.

00474

€35.50

Silicona Castex SM40/100 (vulcaniza a 100º C)

Silicona Castex SM40/100 (vulcaniza a 100º C) 2

In Stock

Casting and melting consumables

Silicone Castex SM40/100 (vulcanizes at 100º C)

00286

€15.52

Excellent silicone with the peculiarity that its vulcanization temperature is 100ºC, maintaining optimal mechanical properties for microfusion. It has high tear resistance and very low shrinkage. Thanks to its good elasticity and at the same time hardness, it allows wax to be injected under pressure without deformation, obtaining highly defined pieces.

In Stock

Casting and melting consumables

Reusable delft clay 1 kg.

00453

€6.73

Clay for sand molding that allows the reproduction of metal parts. Immediately reusable (except for the small burnt part around the piece). Very detailed reproductions.

In Stock

Casting and melting consumables

Soft rubber Castaldo Gold Label 5 Lbs/2,27 Kg.

00420

€80.06

Gold Label soft rubber for microfusion of precious metals in the jewelry industry. Excellent result in the realization of molds with a high level of detail. Lined with gold fabric and blue plastic on the other side.

Aro de cerámica para apoyo de crisol horno de 1 Kg.

In Stock

Casting and melting

Ceramic ring to support the crucible furnace of 1 Kg.

05607

€34.80

In Stock

Casting and melting

Argentum woven plastic sacks 22,7 kg.

00444

€47.70

Especially suitable for silver, and can also be used in brass or bronze. With setting retardant agents and grain refiners that facilitate the creation of smooth and homogeneous surfaces, thus eliminating cleaning problems. ATTENTION: due to its high weight, this article carries a supplement for shipping costs of €8.

In Stock

Casting and melting

Coating "ULTRAVEST" Ransom&Randolph 22.7 KGS.

00430

€62.90

Product for casting GOLD, SILVER, BRASS, BRONZE... Easy cooling and easy cleaning, which reduces the loss of precious material. Valid both in manual foundries and in centrifugal or automatic vacuum machines. ATTENTION: due to its high weight, this article carries a supplement for shipping costs of €8.

Revestimiento "Ransom Plasticat" saco 22,7 KGS.

In Stock

Casting and melting

Ransom&Randolph "PLASTICAST" coating 22.6 kg.

00429

€93.00

Compound for the treatment of rapid prototyping parts using wax or resins, as it withstands excess tension, avoiding breakages that render prototypes useless. Maximum temperatures: 760º. Valid in manual or motor casting. %13 RANSOM, ULTRAVEST%13. ATTENTION: due to its high weight, this item carries a shipping cost supplement of €8.

In Stock

Casting and melting consumables

Investment powder Gold Star Omega+

00489

€88.21

Omega+ has been designed to withstand the challenges of SLA master model casting, both in terms of expansion of the pattern within the mould and carbon removal. Patterns from the following systems - DWS, Envisiontec, 3d Systems, Solid Scape and Invision have been successfully tested, all with exceptional quality castings and faithful reproduction of the...

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to obtain statistical data on the navigation of our users and improve our services.