The ready-to-use extra white platinum bath is valid as a layer before rhodium and as a final finish on the pieces, thanks to the greater whiteness of the deposit.
Content of 2 grams of Platinum and 1 gr of Ruthenium per liter Alternative solution to obtain a precious and quality white finish, with a lower cost than the rhodium bath.
By buying this product you can collect up to
61
loyalty points
.
Your cart will contain total
61
points
that can be converted into a voucher of
€3.05
.
Extra white platinum bath ready for use, with a content of 2 grams of Platinum and 1 gr of Ruthenium per liter. Suitable as a layer before rhodium and as a final finish on the pieces, thanks to the greater whiteness of the deposit.
Formulated with a base of 90% platinum and 10% ruthenium, its composition has been optimized compared to that of a classic pure platinum. The *b* color coordinate, which is what determines the typical slightly yellow color of platinum, has been lowered.
This solution is perfect for those looking for a beautiful and quality white finish, while also taking care of the cost of the metal.
It stands out for its easy application and its high performance. It can be deposited directly onto silver, gold, or palladium. If it is on copper, the usual process must be carried out with this base to avoid contamination (copper, bronze and platinum before and after putting PTLUX).
CHARACTERISTICS:
- Voltage: 1.5 to 3.0 V, optimal value: 1.8 V
- Working temperature: 30-50 ºC, optimal value: 35 ºC
- Minimum exposure time: 45-300 seconds, optimal value: 90 seconds
- Platinum-plated titanium anode.
WORK CYCLE:
*Do not touch the piece with your hands.
Wash the parts to be treated with ultrasound
· Rinse with plenty of running water.
· Connect the cathode clamp of the machine to the electrolytic copper conductive wire.
Apply corresponding voltage
· Electrolytic degreasing from 30 to 45 seconds
· Rinse with running water
· Rinse with distilled water
· Rinse with neutralizing salts
Introduce in the bath for 90 seconds
· Quickly
· Rinse with distilled water
Dry with the usual means
IMPORTANT NOTE: It is necessary to have different containers for each step in order to avoid possible carryover contamination.