In Stock Brushes and abrasives for micromotor Automatic handpiece for Navfram engine Navfram 06156 €169.00 European system handpiece designed for quick change of burs or grinding wheels with the same shaft diameter. Opening by turning the lever very easily. Material: anodized duralumin. Steel shaft mounted on top quality sealed bearings. Tweezers diameter 1/1.5/2/2.35/3/3.20 mm. Add to cart
In Stock Brushes and abrasives for micromotor Sheep mounted cotton thread 00518 €1.00 Sheep with rod to mount in micromotor made of very dense cotton thread. Indicated for polishing and polishing all types of surfaces, especially metal. Add to cart
In Stock Micromotors and brushes 1000 grit mounted sandpaper roll 08043 €1.75 Sandpaper roll mounted on a 2.35 axis for micromotors for sanding small parts quickly and efficiently. Made in Japan. Rolled layers that can be removed according to wear. Grit: 1000 (also available in other grits). Add to cart
In Stock Welding and refractory Tying wire for welding 100 g. €3.50 Annealed "camaraña" thread to tie pieces and hold them in the weld. Available in various diameters, 0.30, 0.40, 0.50 and 0.55 mm. Add to cart
In Stock Hand tools Cast Iron Hand Screw 01112 €4.90 Clamping screw made of cast iron. Jaw opening: 2.6 mm. Dimensions: 131 x 23 x 13mm. Add to cart
In Stock Sandpaper Ceramic abrasive for polishing drum 7x7 mm. 1Kg. 06149 €10.90 Hard-cut ceramic prisms. Use with water and roughing S70. Approximate size: 7x7mm. View
In Stock Accesorios para micromotores Hatho Habras disc orange fine 19 mm mod. 90 619 00563 €1.45 Granules: corundum 6 microns (fine). Plastic disc with embedded abrasive grain for polishing without paste. Recommended use: 5000 r.p.m. Add to cart
In Stock Jwerly cleaning Silver Clean with plastic packaging Delarosa 150ml. 00140 €4.90 Cleans silver and all kinds of precious metals. Valid for direct use and for cleaning by immersion-give a bath for three seconds and rinse with water-. It will not harm precious stones, although its use on porous stones is not recommended. Add to cart
In Stock Brushes and abrasives for micromotor Conical chuck diameter 4.2 mm 00675 €1.14 Mandrel for placing sanding strips and rolling them into the groove. Made of steel. Stem: 2.35mm. Add to cart