Electric furnace for lost wax microfusion works for jewelry.
It includes a programmer for microfusion furnaces that incorporates a microprocessor with 15 programs in memory.
Free shipping from 170 €.
At home from 24 h.
By buying this product you can collect up to
667
loyalty points
.
Your cart will contain total
667
points
that can be converted into a voucher of
€33.35
.
It includes a programmer for microfusion furnaces that incorporates a microprocessor with 15 programs in memory. Each program consists of a waiting time (delayed start-up) and a choice between 1 to a maximum of 18 segments or ramps. Each segment is made up of a controlled ramp (temperature rise or fall) and a holding time. It performs an automatic stop at the end of cooking.
It has a non-deformable structure, built in folded sheet steel and treated with epoxy paints. The door is hinged on the left hand side and is insulated with high-strength rigid ceramic fiber for a perfect fit, as well as incorporating an easy-to-operate latch.
Its insulation placed over the entire surface of the heating chamber is mounted with rigid ceramic fiber to ensure a low heat transfer coefficient, thereby maximizing thermal performance.
The resistances are made with Kanthal wire and distributed on 3 faces (two sides and floor), placed inside refractory plates that protect them from the gases emitted by the microfusion wax and from any contact with the load. Its power is calculated to achieve rapid heating of the oven.
